Certification | Sitemap | Language Translation: Espanol | francais | Deutsch | |
VALVE MANIFOLDS
 
 
TECHNICAL SPECIFICATION
"Powerlock” range of manifolds offer a Safe & Economical method of installation, to control & measure pressure of liquids & gaseous media. They are functionally installed to Control, Isolate, Caliberate, Measure , Equalise Drain or differentiate the pressure of liquid & gasses.
Types
:

2 Valve, 3 Valve & 5 Valve configurations which comes in remote mounting (Pipe to Pipe) Direct Mounting (Pipe and Flange or Flange to Flange) on to the instruments.

 

MATERIALS OF CONSTRUCTION :

Body
:

Forged Single Piece CS A 105 Plated, ASTM A 182 F 316 SS , ASTM A 182 F 304 SS, Monel & Hastelloy.

Stem :

SS 316 , SS 304, Monel

Seat : Metal & Soft
Gland seal :

P.T.F.E. Standard
Grafoil temp . above 180 °C.

Handle :

'T' bar handle CS ASTM A 108 Plated or A 479 304 SS.

Test Pressure : 25°C Room Temperature
Hydrostatic :

Body - 620 Bar
Seat -413 Bar

Pneumatic : Seat-60 Bar
Cracking Pressure :

Standard-7 psi (0.5 Bar)

Finish : CS Zinc Plated, SS –Natural

FEATURES:

  • One piece forged body without weld.
  • Stem threads cold rolled to achieve maximum strength & high accuracy.
  • Packing below the stem threads, prevents stem lubrication washout & isolate threads from system fluids .
  • The stem is anti blow out a major safety feature .
  • S.S. Lock pin adjacent to the hexagon bonnet prevents any unscrewing of the head unit.
  • Each Valve is 100% tested at required pressure to ensure leak tightness at Seat, Shell & Gland.

Powertech Valves (India), Mumbai -63, INDIA. Tel: +91-22-2685 1489. Fax: +91 -22- 2685 3826 Email: sales@powertechvalvesindia.com



Website Designed & Hosted by: Arwa Info Services